Our range of products started with the Kitty Clip, next came the Kitty Card, and more recently the Kitty Funnel. We also now offer the Puppy Clip products, designed for trans men. All of our products are designed primarily for the trans community, to help with body struggles 'below the waist'. The Kitty range is designed for trans women, to minimise the appearance of male genitalia and provide a more feminine look, whereas the Puppy range is designed for trans men, to visibily hide and also remove access to female genitalia.
Things that all of our Kitty and Puppy products have in common are that they are all designed and produced in Sweden, personally by Emma. All of our products use state of the art medical grade bioresin and all are worn by us on a daily basis, which means we intimately understand just how our products are meant to be worn and what they are meant to do.
Did you know that most resin products use the same resin found in auto body repair? Using bioresin however, means that our products are non-cytotoxic, non-sensitizing and non-irritating, which is essential for long term wear. Also, our products are printed at a detail level of 0.05mm, to ensure a smooth and body friendly finish. This means there is no need to sand down any of our products.
Our Kitty Clips currently come in three sizes and three options; Mini, Air and Standard, v1, v2, and also the v3. The Kitty Clip range is designed for trans women.
Kitty Clip Mini
The mini uses a single ring to hold all the genital skin in place and keep both the penis and testicles inside the body. The mini is meant for those with not so much free skin and small to average sized genitals.
Kitty Clip Air
The Air uses the same single ring as the mini to hold all the genital skin in place and keep both the penis and testicles inside the body. With the Air, the design has been simplified with the removal of the top tab. This makes it lighter, and more ergonomic, so it blends in to the surrounding area and gives a very natural look. It is meant for those with minimal free skin and small sized genitals.
Kitty Clip Standard
The standard uses a second larger ring, outside the mini ring to hold all the genital skin in place and keep both the penis and testicles inside the body. The standard is meant for those with more free skin and average to slightly above average sized genitals. The free skin is folded under the outer ring for a cleaner appearance.
V1 and V2
The only difference between v1 and v2, is that the v1 is not meant for straps, whereas the v2 has hoops specifically designed to support a 2 or 3 way strap for extra security. The v1 is aimed at the more advanced and relaxed wearer, the v2 is perfect for anyone getting used to tucking and wearing clips and if you're more active (in or out of the bedroom).
V3
The v3 is a hybrid between the mini and standard clip.It uses a single ring to hold all the genital skin in place and keep both the penis and testicles inside the body. The v3 is meant for those with little to average free skin and small to average sized genitals.
The central bar divides the skin vertically, which gives a much more feminine appearance. It also comes with an integrated adaptor for the Kitty Funnel, to allow the wearer to use the bathroom without removing the clip (it can also be worn without a funnel). We recommend using the short Kitty Funnel with the v3, as the adaptor holds the funnel further back, which inverts the penis more.
Like the v2, the v3 has hoops specifically designed to support a 2 or 3 way strap for extra security. It can be worn by anyone from beginner to advanced, relaxed to more active, although if you wish to use a Kitty Funnel, this is more aimed towards the advanced wearer.
Kitty Funnel
Our Kitty Funnels currently come in four sizes; short (26mm), medium (31mm), long (36mm) and extended (41mm).
The size you use depends entirely on how you wear your clip and how much skin you have, the medium length fits most people.
To measure yourself for the correct length, you need to insert a small, smooth object (such as a Sharpie) between the inner ring of your clip so that the tip of the object touches the tip of the penis. Place a finger tip on the object where the skin comes upto, remove the object and then measure from the tip of the object to your finger tip. You should add roughly 5mm to this number to ensure the funnel just clears the skin. If you are in between lengths, go for the next length up and if the measurement is longer than our extended size, please contact us using the 'Contact' page and we'll do our best to help.
Kitty Card
Our Kitty Cards currently comes in two size options; v1 and v2.
V1 and V2
The v1 is similar in size to a bank card and is pre-shaped to follow the lines of the body. It is meant for those with smaller, less active genitals and less free skin and provides a minimal look.
The v2 is larger is size, similar to the crotch panel on female panties and is pre-shaped to follow the lines of the body. It is meant for those with average or slightly larger genitals and slightly more free skin and offers complete coverage of the groin area. It can also be worn by those with smaller genitals and less free skin, who want the extra coverage.
Each year we are committed to donating a portion of the profits raised from Kitty Card sales to trans focused charities, so buy yours and show your support!
Our Puppy Clip currently comes in one size and two options; v1 and v2. The Puppy Clip range is designed primarily for trans men.
V1
The v1 is our first clip specifically designed for trans men, but it can also be worn by trans women, being similar in design and use to the Kitty Card. It uses a single curved central plate to cover the genitals, removing access and reducing sensation. The plate is vented with a honeycomb design to allow the genitals to breathe and also allow the use of the bathroom.
The v1 also has an outer ring, specifically designed to support a 3 way strap, but for those with piercings, the outer ring can be secured using them, for a more permanent and low profile finish.
V2
The only difference between the v1 and v2, is that the v2 has a semi-open design. This allows full access to the vaginal opening but has a shield for the clitoris to remove direct access and reduce sensation.
Product Customisation
Although our products are made to follow the lines of your body, we know that we're all different and just how important it is that your Kitty or Puppy product works for you.
With that in mind, we also offer a customisation option for all of our Kitty and Puppy range. This can be anything from a little personalisation and expression of your character, to a more bespoke fitting.
Whatever the requirement, please contact us using the 'Contact' page and we'll do our best to help.
When you purchase a product from our site, you are given a QR code that provides access to useful guides with Emma on how to both fit and modify your Kitty and Puppy products.
This page is regularly being updated as new products are created, so please check back from time to time.
