Our range of products started with the Kitty Clip, next came the Kitty Card, and more recently the Kitty Funnel. We also now offer the Puppy Clip products, designed for trans men. All of our products are designed primarily for the trans community, to help with body struggles 'below the waist'. The Kitty range is designed for trans women, to minimise the appearance of male genitalia and provide a more feminine look, whereas the Puppy range is designed for trans men, to visibily hide and also remove access to female genitalia.
Things that all of our Kitty and Puppy products have in common are that they are all designed and produced in Sweden, personally by Emma. The majority use state of the art medical grade bioresin and all are worn by us on a daily basis, which means we intimately understand just how our products are meant to be worn and what they are meant to do.
Did you know that most resin products use the same resin found in auto body repair? Using bioresin however, means that our products are non-cytotoxic, non-sensitizing and non-irritating, which is essential for long term wear. The products printed in bioresin are printed at a detail level of 0.05mm, to ensure a smooth and body friendly finish. This means there is no need to sand them down before use.
Some of our range (the Kitty Clip Standard v2 lite, Standard v1 Air and v3 Air models) are now produced in crystal clear ABS plastic using injection moulding. These products offer the same benefits as the ones in bioresin, but also offer an improved flexibility in their construction and are almost invisible to the eye when worn.
Our Kitty Clips currently come in two sizes; Mini and Standard, and several options; v1, v2, v3, lite and also the Air models. The Kitty Clip range is designed for trans women. All of the Kitty Clip models can be used with our Kitty Funnels, to allow the wearer to visit the bathroom without removal.
Kitty Clip Mini
The Mini uses a single ring to hold all the genital skin in place and keep both the penis and testicles inside the body. The Mini is meant for those with not so much free skin and small to average sized genitals. The Mini blends in to the surrounding area and gives a natural 'mound' appearance. The Mini comes in 2 options; v1 Air and v2 lite.
v1 Air and v2 lite
The only difference between the v1 Air and v2 lite, is that the v1 Air is not meant for straps, whereas the v2 lite has hoops specifically designed to support a 2 or 3 way strap for extra security. The v1 Air is aimed at the more advanced and relaxed wearer, the v2 lite is perfect for anyone getting used to tucking and wearing clips and if you're more active (in or out of the bedroom).
Kitty Clip Standard
The latest version of the original standard size Kitty Clip, which uses a second larger ring, outside the Mini ring to hold all the genital skin in place and keep both the penis and testicles inside the body. The standard is meant for those with more free skin and average to slightly above average sized genitals. The free skin is folded under the outer ring and gives a lower profile, 'spread' appearance. The Standard Lite is moulded in ABS plastic. The Standard comes in two options; v1 Air and v2 lite.
Standard v1 Air and v2 lite
The only difference between the v1 Air and v2 lite, much like the Mini versions, is that the v2 Air is not meant for straps, whereas the v2 lite has hoops specifically designed to support a 2 or 3 way strap for extra security. Both models can be worn by anyone from beginner to advanced wearer, the v2 lite is aimed more at the active wearer (in or out of the bedroom).
Kitty Clip v3
The v3 is a hybrid between the Mini and Standard clip.It uses a single ring to hold all the genital skin in place and keep both the penis and testicles inside the body. The v3 is meant for those with little to average free skin and small to average sized genitals. The central bar divides the skin vertically, which gives the most feminine appearance of any tucking clip available today, mimicking the female labia and clitoral hood.
It has an integrated adaptor for the Kitty Funnel, to allow the wearer to use the bathroom without removing the clip (it can also be worn without a funnel). The v3 Air comes with a specially designed, extra short version of the Kitty Funnel, whereas the v3 lite is designed to use the short Kitty Funnel (sold separately). The v3 comes in 2 options; v3 lite, and the v3 Air.
v3 lite and v3 Air
The main difference between the v3 lite and v3 Air, is that the lite has hoops specifically designed to support a 2 or 3 way strap for extra security, whereas the v3 Air does not support straps and therefore gives the ultimate feminine appearance. The v3 lite is designed for anyone getting used to tucking and wearing clips, but with its lack of strap hoops, the v3 Air is definitely for the more advanced wearer.
Kitty Funnel
The Kitty Funnel is designed to be used in addition to the Kitty Clip, it allows the wearer to remain in their Kitty Clip while going to the bathroom. You position the Kitty Funnel as part of the normal process of fitting your Kitty Clip.
Although the Kitty Funnel was designed for the Kitty Clip range of products, it works with ALL other clip devices, such as the FuFu® clip.
Our Kitty Funnels currently come in four sizes; short (27mm), medium (32mm), long (37mm) and the v3.
The size you use depends entirely on how you wear your clip and how much skin you have, the medium length fits most people. The v3 is made exclusively for the Kitty Clip - v3 Air.
To measure yourself for the correct length, you need to insert a small, smooth object (such as a Sharpie) between the inner ring of your clip so that the tip of the object touches the tip of the penis. Place a finger tip on the object where the skin comes upto, remove the object and then measure from the tip of the object to your finger tip. You should add roughly 5mm to this number to ensure the funnel just clears the skin. If you are in between lengths, go for the next length up and if the measurement is longer than our extended size, please contact us using the 'Contact' page and we'll do our best to help.
Kitty Card
Our Kitty Cards currently comes in one size, with two options; v1 and v2.
v1
The v1 is similar in size to a bank card and is pre-shaped to follow the lines of the body. It is meant for those with smaller, less active genitals and less free skin and provides a minimal look, especially under tighter clothing.
v2
The v2 shares the same dimensions as the v1, but has an integrated Kitty Clip Mini opening that allows the wearer to fashion their skin as little or as much as they like depending on the effect they wish to go for.
Both the v1 and v2 can only be worn with the optional 3 way strap.
Each year we are committed to donating a portion of the profits raised from Kitty Card sales to trans focused charities, so buy yours and show your support!
Puppy Clip
The Puppy Clip is our first clip specifically designed for trans men, but it can also be worn by trans women, being similar in design and use to the Kitty Card. The outer ring is designed to support a 3 ways strap (sold separately), but for those with piercings, the outer ring can be secured using them, for a more permanent and low profile finish. Our Puppy Clip currently comes in one size and three options; v1, v2 and the v2 Air.
v1
The v1 uses a single curved central plate to cover the genitals, removing access and reducing sensation. The plate is vented with a honeycomb design to allow the genitals to breathe and also allow the use of the bathroom.
v2 and v2 Air
The v2 is similar in design to the Puppy v1, but it incorporates an open hooded section to cover the clitoral area. The lower area has bars to completely remove access to the vagina. The open design allows use of the bathroom and the hood gives a small bulge in underwear.
As with other Air products, the v2 Air is a simplified version of the Puppy v2. It incorporates the same open hooded section to cover the clitoral area, but a little shorter. The lower bars are removed which allows full access to the vagina. It is lighter, and more ergonomic, so it blends in to the surrounding area.
Product Customisation
Although our products are made to follow the lines of your body, we know that we're all different and just how important it is that your Kitty or Puppy product works for you.
With that in mind, we also offer a customisation option for all of our Kitty and Puppy range. This can be anything from a little personalisation and expression of your character, to a more bespoke fitting.
Whatever the requirement, please contact us using the 'Contact' page and we'll do our best to help.
When you purchase a product from our site, you are given a QR code that provides access to useful guides with Emma on how to both fit and modify your Kitty and Puppy products.
This page is regularly being updated as new products are created, so please check back from time to time.
